Pool and Shower Knowledge Quiz

Pool & Shower Areas

Pool & Shower Areas

Question 1 of 14.

Which chemicals should be used to clean NON-cushioned patio furniture?

1. Safe Blue then Pro-Tex All
2. Pro-Tex All then Oxy Citrus
3. Turbo Kill then Safe Blue

When cleaning non-cushioned patio furniture, first wipe surfaces with diluted Safe Blue cleaner, then polish with Pro-Tex All.

Question 2 of 14.

How frequently should you replace your dirty microfiber cloth with a clean one?

1. After cleaning each piece of patio furniture
2. Every 10 minutes
3. When the cloth becomes soiled

When your cloth becomes soiled, you should replace it with a fresh one.

Question 3 of 14.

True or False: Using Pro-Tex All on patio furniture will help bring back its luster and protect it from the sun.


Wiping down patio furniture with Pro-Tex All returns its luster and protects it from the sun.

Question 4 of 14.

How should Pro-Tex All be applied?

1. Sprayed directly onto furniture
2. Sprayed onto a clean cotton towel and then wiped onto furniture

Pro-Tex All should be sprayed onto a cotton towel before wiping it on furniture. This avoids over-spraying onto floors, which could create a slipping hazard.

Question 5 of 14.

What chemical should be used when cleaning side tables?

Pro-Tex All
Safe Blue Cleaner
Oxy Citrus
Turbo Kill Disinfectant

Use diluted Safe Blue Cleaner on tabletops and chairs. Wipe completely to remove all debris.

Question 6 of 14.

True or False: Cushioned furniture should be wet to ensure proper cleaning


Cushioned furniture should be dry before cleaning, so that it can be dusted and vacuumed. After dust has been removed, wipe down cushions with Oxy Citrus.

Question 7 of 14.

What additional chemical should be used when there are OIL STAINS on cushioned patio furniture?

1. Pro-Tex All
2. Safe Blue Cleaner
3. Oxy Citrus
4. Turbo Kill Disinfectant

Safe Blue Cleaner can be sprayed on a towel and wiped onto cushioned patio furniture to remove oil stains.

Question 8 of 14.

True or False: It is important to place "wet floor" safety cones before cleaning pool decks and other hard surfaces.


It is important to place wet floor signs before cleaning a pool deck to reduce the risk of falls.

Question 9 of 14.

When cleaning pool decks and other hard surfaces, what is the best way to address heavy stains or soils?

1. Pre-spray the area using Oxy Citrus
2. Pre-spray the area using diluted Safe Blue in a spray bottle
3. Pre-spray the area using diluted Lightning Plus in a pump sprayer
4. Pre-spraying is not helpful for stains on patio surfaces

Diluted Lightning Plus degreaser is the right chemical to pretreat patio stains. Ensure that it remains wet for 5 minutes before scrubbing the surface.

Question 10 of 14.

What is the most effective and environmentally friendly way to clean dirty pool decks and other hard surfaces?

1. Spray down the pool deck with a hose
2. Use an automatic scrubber such as the Tennant T1B micro-scrubber
3. Mop with a traditional wet mop and bucket

The Tennant T1B micro-scrubber is a fast, safe, self-contained cleaning system for hard surfaces. Using the T1B ensures that dirty rinse water does not end up in the pool.

Question 11 of 14.

When cleaning shower areas, which PPE is required?

1. Gloves and goggles
2. Earplugs and respirator
3. Goggles and steel-toed boots

It is very important to wear gloves and splash-resistant safety glasses or goggles when cleaning shower areas due to the use of strong chemicals that contain acid.

Question 12 of 14.

Which chemicals should be used to clean the shower area?

1. Oxy Citrus then Pro-Tex All
2. Turbo Kill then Fresh & Clean
3. Turbo Kill then Pro-Tex All

When cleaning a shower, first spray all touch points with Turbo Kill and allow it to dwell, then scrub dirty surfaces with Fresh & Clean.

Question 13 of 14.

When sanitizing cross-contamination touch points, Turbo Kill needs to dwell for:

1 minute
5 minutes
10 minutes
15 minutes

For maximum effectiveness, Turbo Kill must remain wet for 5 minutes before you continue the shower cleaning process.

Question 14 of 14.

True or False: Fresh & Clean should be applied to tile walls with a spray bottle


Fresh & Clean should be applied to dirty tile walls using the yellow side of a scrub sponge. It is a thick, viscous product that cannot be sprayed.

Next question 1 of 14

All 14 questions completed!

Pool & Shower Areas

Want more stuff like this?

Get the best viral stories straight into your inbox!
Don`t worry, we don`t spam